Epson Perfection 3200 Software Manual page 12

The following screen appears:
3
After verifying that you've scanned the target
correctly, click the right arrow to proceed.
The following screen appears:
This screen lets you specify the reference
file, which contains color measurements of
the IT8 scanner target that MonacoEZcolor
uses in calculating the profile.
8
4
Click Select Reference and load the
reference file corresponding to the reference
number on your IT8 target. (It's the number
in white type at the lower left of the target.)
For example, the reference file for the target
labeled "MONR2002:12-02" is named
"MONR2002.12.02.mrf."
Once you've loaded the reference file, its
name appears below the button.
5
Verify that the reference file name matches
the reference number on the target, then
click the right arrow to proceed. The
following screen appears:
6
Click the Name button in the Printer Profile
area, and enter a name for your printer
profile. Then check Scanner Profile, click
the Name button in the Scanner Profile area,
and enter a name for your scanner profile.
Tip: Use descriptive profile names rather
than the default names suggested by
MonacoEZcolor. For example, you might
name the profile for an EPSON Stylus
2200 using Enhanced Matte Paper "SP2200
EM."
Once you've entered names for the profiles,
they appear under the respective Name
buttons.
® Photo