Epson Perfection 3200 Software Manual page 10

The CMS Defaults screen appears:
5
Turn off all the color management options
for the target scan. You need to do this
whenever you scan a profiling target.
In the Color Management section, set
Scanner->Internal and Internal->Monitor
to <NONE>, and set Internal->Output
to RGB.
In the Profiles for ColorSync section, set
all profiles to <NONE>. You can leave
the other settings at their defaults.
6
When you've completed all the settings,
click OK.
6
7
On the main SilverFast screen, click the
Frame tab. Set the Scan Type to 48-bit
HDR Color, and set the resolution slider to
150 dpi, as shown:
8
Once you've made your settings, click
Prescan. The prescan image appears in
SilverFast's scanner window: