1.4 Adjusting the Leading Edge Margin
Adjust the margin by changing the setting in service mode (adjusting the image write start
position to the LED exposure unit in sub scanning direction; an increase of '10' will in-
crease the margin by 0.5 mm): COPIER/PRINTER>ADJUST>FEED-ADJ>ADJ-VSYNC/
AD-V-OHP/AD-V-SP/AD-V-THC.
1.5 Adjusting the Left/Right Non-Image Width
Adjust the non-image width by changing the setting in service mode (adjusting the image
mask area to the LED exposure unit in main scanning direction; a change of '10' will in-
crease the non-image width by 0.5 mm).
1.6 Leading Edge Non-Image Width
Adjust the non-image width by changing the setting in service mode (adjusting the image
mask area to the LED exposure unit in sub scanning direction; an increase by '10' will in-
crease the non-image width by 0.5 mm).
CHAPTER 2 STANDARDS AND ADJUSTMENTS
2-7P