Disabling The Projector's Buttons - Epson PowerLite S7 User Manual

note
You can lock these settings to
prevent them from being
changed without a password
(see page 63).
Fine-Tuning the Projector
66
7. When the message
appears, select
Yes
few moments. Do not use your projector, remote control, or
video source while the logo is being saved.
8. When you see the message
Choosing When to Display the Image
After your image is saved, you can set it to display as the startup
screen, the screen you see when there's no signal, or the screen you see
when you press the
A/V Mute
1. Press the button, highlight the
Menu
.
Enter
2. Select and press
Display
3. Choose from these display options:
■ Set
Display Background
when there is no signal.
■ Set
Startup Screen
projector is warming up.
■ Set
A/V Mute
the
A/V Mute
4. When you're finished, press

Disabling the Projector's Buttons

When you enable the Control Panel Lock function, you can lock all of
the projector's buttons, or all of the buttons except the Ppower
button. The remote control can still be used to operate the projector.
1. Press the button, highlight the
Menu
.
Enter
2. Select
Control Panel Lock
Save this image as the User's Logo?
and press . Saving the logo may take a
Enter
, press
Completed
button (see page 48).
Extended
.
Enter
to to display your image
Logo
to to display your image when the
On
to to display your image when you press
Logo
button.
to exit.
Menu
Settings
and press the
to exit.
Menu
menu, and press
menu, and press
button.
Enter