Solving Problems With The Remote Control - Epson PowerLite S7 User Manual

There is no sound, or the sound is not loud enough.
■ Use the buttons to adjust the volume (see page 50), or
Volume
adjust the
Volume
Make sure A/V Mute is not enabled. (Press the
■
to disable it.)
If your presentation includes computer audio, make sure the
■
volume control on your computer is not turned all the way down
or muted. In Windows, you may be able to check this by clicking
the volume control in your Windows system tray (lower right
corner of the screen). On a Mac, you may be able to adjust the
volume from your menu bar (top right corner of the screen) or via
the volume control function keys.
If you're using a DVD player or other video source, make sure the
■
cables are connected correctly, as described on page 34.
Nothing appears on an external monitor
The only images that can be displayed on an external monitor are
computer images connected through the
port (see page 33).
Video)
Solving Problems With the Remote
Control
The projector doesn't respond to remote control commands.
Point the remote control towards the projector's receiver. Make
■
sure you are within 19.7 feet (6 meters) of the projector and
within a 30° horizontal angle and a 15° vertical angle from the
projector's front or back receiver.
The remote control's batteries may not be installed correctly or
■
may be low on power. To change the batteries, see page 76.
setting in the Settings menu.
Computer (Component
button
A/V Mute
Solving Problems
89