Set Up Internet Connection By Wps (Repeater/Bridge, Client) - TP-Link WA801ND User Manual

Chapter 3
4. Connect your wireless devices to the different Wi-Fi networks to be isolated by
VLANs.
3. 3. Set up Internet Connection by WPS (Repeater/
Bridge, Client)
In Repeater/Bridge and Client modes, after hardware connection, you can use the WPS
(Wi-Fi Protected Setup) function to set up internet connection simply by pressing the
WPS button of your access point and the host router.
1. Connect the hardware of your access point according to the mode needed.
2. Press the WPS button of your access point.
3. Within 2 minutes, press the WPS button of the host router.
4. The WPS LED of your access point starts flashing, and when it turns on, the internet
connection has been set up successfully.
Note:
1. The WPS LED remains on for 2 minutes and then turns off.
2. In Repeater/Bridge mode, the access point shares the same SSID (network name) and password with the host router.
Set Up Internet Connection Via Quick Setup Wizard
17