Table of Contents
Advertisement
Chapter 4
•
Mode
- The current wireless mode which the access point works on.
•
Channel
- The current wireless channel in use.
•
Channel Width
•
MAC Address
•
WDS Status
•
System Up Time
powered on or reset.
Click
Refresh
to get the latest status and settings of the access point.
4. 2.
Network
4. 2. 1.
LAN
1. Visit http://tplinkap.net, and log in with the username and password you set for the
access point.
2. Go to
Network
> LAN.
3. Configure the IP parameters of the LAN and click Save.
• Type
- Either select
to configure IP address manually.
• MAC Address
- The physical address of the LAN ports. The value can not be changed.
• IP Address
- Enter the IP address in dotted-decimal notation if your select
(factory default - 192.168.0.254).
• Subnet Mask
- An address code that determines the size of the network. Normally
255.255.255.0 is used as the subnet mask.
Note:
• If you have changed the IP address, you must use the new IP address to log in.
• If you select
Smart
IP(DHCP), the DHCP server of the access point will not start up.
- The current wireless channel width in use.
- The physical address of the access point.
- The status of WDS connection is displayed.
- The length of the time since the access point was last
Smart IP(DHCP)
to get IP address from DHCP server, or
Configure the Access Point
Static IP
Static IP
20
Advertisement
Table of Contents
