Troubleshooting; Display The Same Image - Epson PowerLite S1 Quick Setup Manual

Troubleshooting

If you see a blank screen
If you see a blank screen or the No signal message
after turning on your notebook, check the following:
Make sure the
is green and not flashing and the lens cover
is off.
Try turning off the notebook and restarting it.
If you've connected more than one computer and/or video source,
you may need to press the Source button on top of the projector
to select your video source. (Allow a few seconds for the projector
to sync up after pressing it.)
If you're using Windows,
function key that lets you display on an external monitor. It may
have an icon such as
Allow a few seconds for the projector to sync up after pressing it.
If the projector and the notebook don't

display the same image

If you're using a Windows notebook:
On most systems, the
between the LCD screen and the projector, or display on both
at the same time.
You might need to use the Display utility in the Control Panel
to enable both the LCD screen and external monitor port.
Check your notebook's manual or online help for details.
If you have dual monitor support, you may need to uncheck the
option to extend your Windows desktop in the Display Properties.
If you're using a Macintosh
OS X
1. From the Apple
then click Displays.
2. Select VGA Display or Color LCD,
click Arrangement or Arrange,
and click Mirror Displays.
OS 9.x or earlier
1. From the Apple menu, select Control Panels, then click Monitors
or Monitors and Sound.
2. Click Arrange.
3. Drag one monitor icon on top of the other. This lets you display
on the projector screen as well as the LCD screen.
If the Arrange option isn't available, you may need to select one
of the Simulscan resolution settings. See your computer's help
for instructions.
EPSON is a registered trademark of SEIKO EPSON CORPORATION. PowerLite and PrivateLine are registered
trademarks and EPSON Store is a service mark of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks
of their respective owners. EPSON disclaims any and all rights in those marks.
Copyright © 2003 by Epson America, Inc. 6/03
Printed in China
power light on the projector
®
hold down the Fn key and press the
, or it may be labelled CRT/LCD.
or CRT/LCD key lets you toggle
®
®
menu, select System Preferences,
Click here
®
PowerBook
No signal ( Help )
?
:
Click here
Drag one monitor icon
on top of the other
CPD-16290R1