Site Considerations - Grizzly T31681 Owner's Manual

3. With the help of an additional person, care-
fully lift machine off shipping container and
place on a flat, stable surface.
Leveling Machine
1. Loosen cap screw attaching each adjustable
foot to foot rail (see Figure 5) using 6mm hex
wrench.
2.
Place metal shims (as required) between
adjustable foot and foot rail until machine is
level (see Figure 5).
Foot Rail
Metal Shim
Figure 5. Leveling machine with metal shim.
3. Tighten cap screws and verify machine does
not wobble on surface.
Model T31681 (Mfd. Since 12/19)
Workbench Load
Refer to the Machine Data Sheet for the weight
and footprint specifications of your machine.
Some workbenches may require additional rein-
forcement to support the weight of the machine
and workpiece materials.
Placement Location
Consider anticipated workpiece sizes and addi-
tional space needed for auxiliary stands, work
tables, or other machinery when establishing a
location for this machine in the shop. Below is
the minimum amount of space needed for the
machine.
Adjustable
Foot
Cap
Screw

Site Considerations

Cutting Path
18"
22 ⁄ "
1
2
Figure 6. Minimum working clearances.
Children and visitors may be
seriously injured if unsuper-
vised around this machine.
Lock entrances to the shop
or disable start switch or
power connection to prevent
unsupervised use.
31"
18½"
-13-