Section 3: Setup; Needed For Setup; Unpacking; Assembly - Grizzly T31681 Owner's Manual

This
serious
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Wear safety glasses during
the entire setup process!
This machine and its
components
heavy. Get lifting help or
use power lifting equip-
ment such as a forklift to
move heavy items.

Needed for Setup

The following items are needed, but not included,
for the setup/assembly of this machine.
Description
• Additional Person for Lifting ........................... 1
• Safety Glasses (for each person) ............ 1 Pair
• Heavy Leather Gloves (for each person) . 1 Pair
• Hex Wrench 6mm ........................................... 1
• Open-End Wrench 8mm ................................. 1
• Metal Shims .................................... As Needed
• Level ............................................................... 1
• Two/Three Compartment Sink ........................ 1
• Dishwasher ..................................................... 1
• Soft Sponge/Cloth .......................................... 1
• Rubber Dishwashing Gloves ................... 1 Pair
• Hot Water ........................................ As Needed
• Dishwashing Detergent .................. As Needed
• Food-Grade Sanitizer ..................... As Needed
-12-

SECTION 3: SETUP

machine presents
injury hazards
are very
Qty

Unpacking

This machine was carefully packaged for safe
transport. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage. If items are damaged,
please call us immediately at (570) 546-9663.
IMPORTANT: Save all packaging materials until
you are completely satisfied with the machine and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your machine later.

Assembly

The Model T31681 1 HP Commercial-Grade Bone
Saw is completely assembled at the factory, but
it must be removed from the shipping container
before operation.
Unpacking Machine
1.
Remove banding straps, top cover, and side-
walls of wooden crate.
2.
Loosen 8mm hex bolts attaching machine to
U-bracket and remove (see Figure 4).
8mm Hex Bolts
U-bracket
Figure 4. Location of U-bracket hex bolts.
Model T31681 (Mfd. Since 12/19)