Unit description
1.4.2
Handling
Please proceed as follows in order to install the unit in the docking station:
1.
Pull the support legs (1) from the
bottom plate and place the
docking station on a stable
surface
2.
Push the fastening latch (1) to
the back.
3.
While pulling both locking pins
simultaneously, ensure that the
support (2) is in the lower
procession.
— 10
SPECTRO xSORT — 05.09.2014
Need help?
Do you have a question about the SPECTRO xSORT and is the answer not in the manual?