Table of Contents
Advertisement
WARNING: AFTER INSTALLATION, CHECK TO SEE IF THE MACHINE IS WORKING PROPERLY (see the
Installation Module C)
WATER CONNECTIONS
•
No leaks from the connections or tubes
FUNCTIONING
•
Boiler and operating pressures are normal.
•
The pressure gauge is working properly.
•
The self-levelling device is working properly.
•
The expansion valves are working properly
WARNING: ONCE THE MACHINE HAS BEEN INSTALLED AND IS READY FOR USE, BEFORE ALLOWING
THE WORKER TO START USING THE MACHINE, WASH THE INTERNAL COMPONENTS ACCORDING
TO THE INSTRUCTIONS BELOW:
COFFEE CIRCUIT / MILK CIRCUIT
•
Keep the coffee circuit wash key (26)
HOT WATER
•
Continuously dispense hot water until at least 2 liters of water have been dispensed.
STEAM (also with Turbosteam)
•
Dispense steam from the nozzles for about a minute, using the appropriate buttons.
5. Installation Check-up
.
pressed for a few seconds.
9 EN
Advertisement
Table of Contents
