Table of Contents
Advertisement
27
26
28
12
35
This symbol indicates the boiler water level.
During the loading phase, the dark bottom part of the icon
blinks.
When the optimum level is reached, the symbol looks like
this:
When the resistance is activated and functioning, the icon
looks like this:
When the boiler pressure reaches the set value, the icon
looks like this:
10. Description of the control panel - Keyboard
5
34
24
30
OK
32
Description display symbols
(dark inside).
(light inside).
USE
DESCRIPTION OF THE COMPONENTS
29
5
Graphical display
12 Hot water button
13 Steam dispensing knob
24
"RES" key (to quit programming mode/
25 Special key
39
26
27 "i"
31
28 Milk circuit wash key - automatic wash
29
"PRG" key (to access programming
45
mode/menu)
(13)
30
"+" key (to modify parameters/clock)
31
"-" key (to modify parameters/clock)
32 Beverage selector key
34
"CUSTOMER PARAMETERS" key
35 Hot water "STOP-CONTINUOUS" key
39 Card services slit (technical programming)
45 Turbosteam selector *
OK
key (stops products from being
The components - * - are applied only in
When the machine is in operation, the two icons
alternate on the display, indicating the presence of the
electric heating.
This symbol indicates the boiler pressure value.
This symbol indicates that the machine is pre-
heating or the boiler pressure has dropped below
0.5 bar.
The symbols
until the machine reaches the working pressure.
The machine has reached the set work pressure and
temperature when the icon
display.
This symbol indicates that a services card has
been inserted in the slot (39) and, therefore,
the technical programming menu can be
accessed.
13 EN
key (displays the number of cycles)
and
will alternate on the display
disappears from the
Advertisement
Table of Contents
