Keysight M9203A Startup Manual page 16

Step 4: Install the Module
9. Install all chassis covers and filler panels after installing the module. Missing
filler panels may prevent necessary air circulation inside the chassis.
10. Plug in and power up the PXIe chassis (If you are using a remote controller,
reboot the host PC).
11. Check the status LED on the module front panel, it should be orange or red
when the power is applied, if not there is a problem with either the module or
the chassis.
12. Follow the New Hardware Wizard's instructions to install the driver.
13. Reboot the system.
16 Keysight M9203A Startup Guide