Front Panel Leds - Keysight M9203A Startup Manual

Step 4: Install the Module

Front Panel LEDs

Indicator
DPU
STATUS
If warning or error status is observed, please try the following steps:
Power-cycle the PC (If using a remote controller, observe the power sequence
requirements).
If the error persists please contact Keysight technical support
sight.com/find/assist.
18
Purpose Color
DPU status
Module
status
State Meaning
Off DPU is not configured
Green, blinking Module initialization in progress
Green Module OK (firmware not yet
loaded)
White DPU firmware loaded (ready)
White, blinking Firmware initialization in progress
Green, blinking Module initialization in progress
Yellow, blinking Warning
Red, blinking Error
Green OK (ready)
Keysight M9203A Startup Guide
http://www.key-