If No Local Area Network (Lan) Is Available; Example 5: Connection Using Wireless Adhoc Mode Lan Only - Epson PowerLite 8300i Software Manual

Examples Network Connection Configurations
Set up a wireless LAN connection with EasyMP.net.
2
"Establishing a Network Connection (via Wireless LAN)"
in the EasyMP.net Setup Guide.
* Always check "Enable" for "Adhoc mode" during wireless
LAN setup.

If No Local Area Network (LAN) is Available

Example 5: Connection Using Wireless Adhoc Mode LAN
Only
Wireless LAN Connection
Windows Client (Wireless
Connection)
Wireless LAN
This projector
Wired LAN
Connection Using only Wireless Adhoc Mode (without an Access Point).
Network Environment
• No cable network or wireless network environment is available.
• The projector is fixed to the ceiling and installation is difficult.
Supported wireless LAN cards
See "Wireless LAN Card" in the
Adhoc Mode
EasyMP.net Setup Guide .
Possible applications
• Each presenter can bring their notebook computer (with a wireless
LAN port) into the room where the projector is installed and project
files using a wireless connection.
You do not need to change the PC connection for each presenter.
Notes
• As the projector is not connected to a network, it can only project
files from a computer with a Wireless LAN card.
Setting Up a Wireless LAN Connection
PROCEDURE
Insert the wireless LAN card into the projector's PC
1
card slot.
Set up a wireless LAN connection with EasyMP.net.
2
"Establishing a Network Connection (via Wireless LAN)"
in the EasyMP.net Setup Guide
* Always check "Enable" for "Adhoc mode" during wireless
LAN setup.
EasyMP .net Operation Guide
49