Disconnecting The Network Connection; Disconnecting The Network Connection From The Pc; Disconnecting The Network Connection From The Projector - Epson PowerLite 8300i Software Manual

Projecting PC Images (Network Screen)
Option Name
Color mode Selects one of 5 colour modes to suit the images you are
projecting. The brightness level will also vary between the
modes. The next mode is selected each time "Color Mode"
is clicked according to the following sequence.
Presentation → Theatre
←sRGB
Dynamic
Selected Displays the name of the selected projector. If multiple
projector projectors are connected to the PC, select the projector
that you want to control.
Close Closes the Basic Setup screen.
TIP
• Keystone distortion correction will reduce the size of the projected
image.
• If you experience a lack of uniformity after keystone distortion
correction, reduce the sharpness level.
in the "User's Guide".
• Keystone distortion can also be corrected from the projector's
configuration menu. p.82 ""Setting"
Guide".
• If the gauge indicator value does not change when you are
correcting keystone distortion, you have exceeded the correction
limit. Make sure the projector is not tilted beyond the limit.
p.48 "Correcting Distortion in the Projection Area (Keystone
Correction)" in the "User's Guide".
Function
← Livingroom
p.75""Video" Menu"
Menu" in the "User's

Disconnecting the Network Connection

There are two ways to disconnect the network connection between the
projector and the PC. You can either disconnect the PC from the projector
or disconnect the projector from the PC.

Disconnecting the Network Connection from the PC

Click "Disconnect" or "Quit" on the EMP NS Connection toolbar.
• If you click "Disconnect", the network connection is disconnected.
• If you click "Quit", the network connection is disconnected and
EMP NS Connection is terminated.
TIP
If multiple projectors are connected to the PC, they will all be
disconnected.

Disconnecting the Network Connection from the Projector

PROCEDURE
Press the [ESC] button on the remote control.
1
Select "Quit" and press the [Ente] button on the
2
remote control.
The message "The projector was disconnected from the PC."
appears on the PC screen.
EasyMP .net Operation Guide
35
Quit
Disconnect