Example 2: Connection Using A Wireless Lan Access Point - Epson PowerLite 8300i Software Manual

Examples Network Connection Configurations
Example 2: Connection Using a Wireless LAN Access
Point
Connection using a wireless LAN
Windows Client (Wire-
less Connection)
Wireless LAN Access
Point
Wireless LAN
This project
Wired LAN
An Example of Connection Configuration Networked via a Wireless LAN
Access Point
Network Environment
• A Wireless LAN is in use or the projector is fixed to the ceiling and
it is difficult to connect a network cable to it. This is also the case
when it will be difficult to use the wireless LAN in the future.
Supported wireless LAN cards
• See "Wireless LAN Card" in the EasyMP.net Setup Guide.
Possible applications
• Each presenter can bring their notebook computer (with a wireless
LAN port) into the presentation and project files from their
computers using a wireless LAN connection.
You do not need to change the PC connection for each presenter.
DNS
DHCP
Local Area Network
Windows Server Windows Client (Wired Con-
nection)
• The status of the projector can be monitored from a PC connected
to the connector. If multiple projectors have been installed, they
can all be monitored from a network PC. You do not need to go to
the classroom or the conference room where the projector is
installed.
Notes
• A RADIUS server or others can be installed to ensure security.
Setting Up the Wireless LAN Connection
PROCEDURE
Insert a wireless LAN card into the PC card slot of the
1
projector.
Set up the wireless LAN with EasyMP.net.
2
"Establishing a Network Connection (Via Wireless LAN)"
in the EasyMP.net Setup Guide
EasyMP .net Operation Guide
46