Setting Easymp.net Options (Easyconfiguration); Managing Easymp.net Users; Registering/Editing/Deleting A User; Controlling Access Rights - Epson PowerLite 8300i Software Manual

Setting EasyMP.net Options (EasyConfiguration)

Various network parameters and application defaults can be set using
EasyConfiguration. Click the left-hand side menu to start the setup.

Managing EasyMP.net Users

Registering/Editing/Deleting a User

"System Management" - "User management"
To register a user, click "Create New" and set the parameters in the table
below.
To edit a registered user's data, click the "Edit" button before the user ID
you wish to edit.
User ID Enter an ID to be used in EasyMP.net.
One to 20 alphanumeric characters can be entered. No
symbols are allowed.
Password Enter a password for system logon. The password can
be 0 to 14 alphanumeric characters.
Reenter password. Reenter the password for confirmation.
EasyMP.net
administrator
Change the password. This box appears during user editing. Check this box to
Deleting a User
To delete a user, select the user and click "Delete".
Click the required
menu.

Controlling Access Rights

"System Management" - "Access Management"
Access rights to allow or limit the access of each user to EasyMP.net can
be set using the PC browser.
Access to the common
folder
Access to EasyMenu
Access to EasyRemote Specify the access right to EasyRemote for control of
EasyMP .net Operation Guide
Check this box to define the current user as the
EasyMP.net administrator. Then this user can set and
change the EasyConfiguration data without any access
restrictions.
change the password.
p.36 Access procedure .
Specify the access right to the "EveryOne" common
folder.
Specify the access right to EasyMenu for projector
setup using the PC browser.
the projector power and sounds using the PC browser.
18