Adjusting Dolby Audio Settings; Setting Video Options - Epson MovieMate 50 User Manual

■ Default:
Press
for the Disc Lock password and lamp hours).
■ Password:
See page 35 for instructions on setting a password for locking DVDs.
■ Disc Lock:
See page 35 for instructions on setting a password for locking DVDs.
5. To exit the Setup menu, press

Adjusting Dolby Audio Settings

You can adjust settings for external equipment with a DTS/Dolby
Digital Decoder or DVDs recorded in Dolby Digital.
1. Press the button on the remote control. You see the
:
Setup Page
2. Press to display the
3. Press to highlight
can select the following settings:
■ Digital Output
to the Audio-Out port.
■ Night Mode
volume.
4. Press to select the setting you want to change, then press
5. To exit the menu, press

Setting Video Options

You can use the Visual Setup menu to adjust the signal format for external video equipment
and set other video options.
1. Press on the remote control. You see the Visual Setup menu.
2. Press to highlight
3. Press until you see the option you want to set.
and press to return all settings to their factory defaults (except
.
Audio Setup Page
Digital Output
: Change to if you have connected a DTS/Dolby Digital Decoder
All
: Turn this setting on if you are watching a Dolby Digital DVD at low
.
, then press
Option
Language
.
or , then press
Night Mode
to select it.
Doing More with Epson MovieMate
to select it. You
to save it.
39