Summary of Contents for Insignia Monochrome MC90SQ
Page 1
www.insigniashowers.com Last Modified: 16/08/2021 INSTALLATION MANUAL MC90SQ Monochrome 900mm x 900mm 30 Day Technical Support: Call 01908 317512 and request technical support for aiding your installation. Replacements Parts: Inside of your warranty period visit: https://www.insigniashowers.com, click support and make a warranty claim.
www.insigniashowers.com Last Modified: 16/08/2021 Contents Thank you for your purchase Installing the Water Connections Tips for assembly Signing off your shower Braided Hose QR Code/Link Parts list Pressure/Tool requirements Steam Room and Shower Safety Guide Box contents WEEE Compliance Statement Screw Pack/Accessory Contents Screw Pack/Accessory Contents Diagrams Box Contents (exploded diagram)
Last Modified: 16/08/2021 Thank you for your recent purchase of an Insignia shower. Please read this booklet with great care to ensure you get the best out of your build and have a shower that will last for many years to come! Like everything, in order to obtain a first class product that will serve you well for many years, the effort and correctness put into the assembly will reflect in the quality of your finish.
TIP 4—Sealing When using Insignia’s RubberGum, please ensure the product does not come in contact with your silicone as this will cause the RubberGum to fail and will not adhere as intended. Rubbergum is immediately waterproof and will gain additional strength over time.
www.insigniashowers.com Last Modified: 16/08/2021 Pressure/Water Requirements Tools Required We recommend a BAR pressure between 2.5 and 3.4 BAR. If You will require: you have a combi boiler system no problem should be • • experienced. If you have a gravity feed older type installation Scissors Philips Screwdriver (hot water tank type usually less than 1 BAR) you will almost...
Backwalls Left Back Panel Right Back Panel VERY IMPORTANT Have you got everything? If not please contact the Insignia directly on 01908 317 512. Remember NEVER book your tradesman until everything has arrived, been checked and is present. No replacement/missing parts can be obtained free of charge during or after the build.
www.insigniashowers.com Last Modified: 16/08/2021 Step 2 — Applying the RubberGum Apply RubberGum to raised sections of the tray and remove backing paper.
Page 13
www.insigniashowers.com Last Modified: 16/08/2021 Step 3 — Installing the Water Valve and Hand Shower Holder...
Page 14
www.insigniashowers.com Last Modified: 16/08/2021 Step 3 — Installing the Glass Shelf and Back Panel Seals...
3. Do not aim the hand shower directly at the joints of your shower as this does not fall under “normal showering conditions”. However, due to Insignia’s unique design of the shower tray, water will only leak back in to the tray so you won’t get flooded.
www.insigniashowers.com Last Modified: 16/08/2021 Parts List Part Code Part Description Part Code Part Description SP263A 23mm Monochrome Door Wheels (Spring) SP101 PVC Hose SP263B 23mm Monochrome Door Wheels (Non-Spring) SP268 Black Shower Hose SP403 Door Stops—Monochrome AMI01 Jubilee Clip SP312 Monochrome Door Handles SP057 90 Degree Chrome Water Outlet...
Page 26
www.insigniashowers.com Last Modified: 16/08/2021 Steam Room & Shower Safety Guide Never leave children unattended in the shower or bath. Never bath children (under 12) using whirlpool function if fitted. Regulate the temperature of water before showering. Never allow children to use the steam function. This function is for ADULTS ONLY. Always be aware of the steam outlet position.
Page 27
(EEE) have to fulfil certain obligations. Under the WEEE directive Insignia is considered the producer of certain products we supply and in line with the demands of the legislation we are pleased to offer the op- portunity to return these products to us for treatment and recycling.
Page 28
All images are registered with ImageTraker Insignia™ is a registered trademark of Maclean International Ltd All images are subject to copyright. Images may not be used in any way shape or form with out written permission from Maclean International Ltd. Images are NOT permitted...