ZyXEL Communications PM7300-T0 User Manual page 22

Each field is described in the following table.
Table 6 System Info: Detailed Information
LABEL DESCRIPTION
Host Name This field displays the PM7300-T0 system name. It is used for identification.
Model Name This shows the model number of your PM7300-T0.
Serial Number This field displays the serial number of the PM7300-T0.
Firmware Version This is the current version of the firmware inside the PM7300-T0.
System UpTime This field displays how long the PM7300-T0 has been running since it last started up. The
PM7300-T0 starts up when you plug it in, when you restart it (Maintenance > Reboot), or when
you reset it.
Interface Status
Virtual ports are shown here. You can see the ports in use and their transmission rate.
LAN Information
IP Address This is the current IP address of the PM7300-T0 in the LAN.
Subnet Mask This is the current subnet mask in the LAN.
MAC Address This shows the network adapter MAC (Media Access Control) Address of the LAN interface.
Chapter 4 System Info
PM7300-T0 User's Guide
22