Quick Start Guide
Hardware Connections
Connect the fiber optic cable to the
1
PON port.
Warning! To avoid possible eye injury,
do NOT look into an operating
fiber-optic module's connector.
2
Connect a telephone.
3
Connect using the yellow Ethernet
cable.
4
Connect a USB memory stick
for file sharing.
5
Connect power and turn on.
6
Check LEDs.
6
INTERNET
Internet is ready. Go to Wireless Setup.
ON
INTERNET
Internet is not ready. Go to Internet Setup.
OFF
Internet Setup
Username: admin
Password: 1234
See the User's Guide at www.zyxel.com for more information,
1/2
including customer support and safety warnings.
1
INTERNET
IP Address: 192.168.1.1
Change Password
Wireless N GPON IAD with 4-port GbE LAN
PHONE1 PHONE2
LAN1
PON
RJ11
RJ45
2
3
PHONE
The Phone LED is on
VoIP registration is complete.
ON
PHONE
The Phone LED is off
VoIP registration is not complete.
Go to the Web Configurator and configure
VoIP settings.
OFF
Copyright © 2016 ZyXEL Communications Corp. All Rights Reserved
PMG5317-T20A
Power
ON
LAN2
LAN3
LAN4
USB
4
Quick Start
5