Quick Start Guide
Hardware Connections
Connect the fiber optic cable to
the PON port.
1
Warning! To avoid possible eye
injury, do NOT look into an
operating fiber-optic module's
connector.
Connect a computer to the LAN
2
port using the yellow Ethernet
cable.
Connect the power cable to the
3
modem and press the power button.
Make sure the LEDs are on and
4
check the status.
1/2
GPON HGU with 1-port GbE LAN
PON
1
2
INTERNET
POWER
PON
INTERNET
LAN
PMG2005-T20B
LAN
3
On: Power on and system ready
Blinking: Self-testing and starting up
Green
Off: Power off
Off
On: Fiber connection ready
Blinking: Synchronizing with OLT (fiber terminal)
Green
Off: Fiber connection not ready
Off
On: IP connection ready but no traffic
Blinking: Transmitting IP traffic
Green
Off: Internet connection not ready
Off
On: Ethernet connection ready
Blinking: Transmitting data via LAN
Green
Off: Ethernet connection not ready
Off
Copyright © 2019 Zyxel Communications Corp. All Rights Reserved