Dell EMC VxFlex Ready Node 14G Manual page 40

Port Configuration
Hardware Configuration and Operating System Installation Guide - Windows Servers
40
3. Repeat the previous steps for every VxFlex OS role that you want to activate.
4. Configure the IP addresses for every network adapter:
a. Right-click the network adapter, and select Properties.
b. In the Networking tab > This connection uses the following items field,
select the correct Internet protocol version, and then click Properties.
c. Select the Use the following IP address option, type the IP address and
subnet mask in the appropriate fields, and then click OK twice.
Note
Additionally, for the "Public" network adapter, type the default gateway
address and at least one DNS server address in the appropriate fields so that
this server can join a domain later on.
5. For every node, repeat all previous steps.
6. When all IP addresses are configured on all nodes, open the command prompt
on a node and ping all data IP addresses of the other nodes to ensure that you
have the correct connectivity on each node:
ping <x.x.x.x>
<x.x.x.x> represents the data IP address).
Where