Retrieve Device Paths In A Windows Server With An H730P/H740P Controller - Dell EMC VxFlex Ready Node 14G Manual

Retrieve device paths in a Windows server with an H730p/
H740p controller
WARNING
Do not change the state of an Initialized device. Contact your
Administrator for support.
Retrieve the device paths in a Windows-based VxFlex Ready Node server with an
H730p/H740p controller card.
Before you begin
Ensure that you have administrator-level user access to the server.
In Windows servers:
The operating system device path is in the format PhysicalDriveX, where
l
the disk number.
Run the commands from the command prompt.
l
Procedure
1. Log in to the server.
2. Display the VDs of the disks on the server:
perccli64.exe /c0/vall show
Output similar to the following is displayed:
The output displays the device groups (DGs) and their associated VD.
3. Match a VD to a device path:

Retrieve device paths in a Windows server with an H730p/H740p controller

Preparing Disks
X is
55