Dell EMC VxFlex Ready Node 14G Manual page 28

Installing the Operating System
Hardware Configuration and Operating System Installation Guide - Windows Servers
28
2. Boot the server by using the DELL Life Cycle Controller feature.
3. During the Windows OS installation, when prompted to select the disk for OS
installation, select the 120/240 GB BOSS device.
4. Click Next.
The Windows OS installation starts.
5. Install the VxFlex OS-required prerequisites, such as OpenSSL, as described in
System requirements
6. Install the Hyper-V role and Failover Clustering feature.
7. Change the server name and connect all system computers into one domain.
8. Ensure that you can open an RDP session to the server.
9. Create a failover cluster with all the nodes.
Results
The operating system installation is complete. When setting up a new node, continue
with disk configuration, as described in the following sections.
on page 26.