PCE Instruments PCE-PDR 10 User Manual page 10

6.6.3 Sampling time / log interval
•
Navigate to the advanced settings as described above.
•
Press the "SET" key repeatedly until "SP-t" appears on the display.
•
Select the desired log interval with the "▼" or "▲ / Time" keys and confirm the entry
with the "LOG / Enter" key. The following can be selected:
5, 10, 30, 60, 120, 300, 600 seconds and auto.
•
Press the "SET" key repeatedly until you return to measuring mode or wait for 5
seconds; then the meter will return to measuring mode automatically.
Attention!
"auto" means that each time the measured values change (>±10 digits), the values are saved.
If the setting is 1 second, individual data records may be lost.
6.6.4 Key / control sound
•
Navigate to the advanced settings as described above.
Press the "SET" key repeatedly until "bEEP" appears on the display.
•
Use the "▼" or "▲ / Time" keys to select yes or no.
•
Confirm the selection with the "LOG / Enter" key.
•
Press the "SET" key repeatedly until you return to measuring mode or wait for 5
seconds; the meter will return to measuring mode automatically.
6.6.5 Decimal character
•
Navigate to the advanced settings as described above.
Press the "SET" key repeatedly until "dEC" appears on the display.
•
Use the "▼" or "▲ / Time" keys to select "Euro" or "USA".
"Euro" corresponds to the decimal comma and "USA" corresponds to the decimal
point. In Europe, the "comma" is predominantly used as decimal character.
•
Confirm the selection with the "LOG / Enter" key.
•
Press the "SET" key repeatedly until you return to measuring mode or wait for 5
seconds; the meter will return to measuring mode automatically.
6.6.6 RS232 output
•
Navigate to the advanced settings as described above.
Press the "SET" key repeatedly until "rS232" appears on the display.
•
Use the "▼" or "▲ / Time" keys to select yes or no.
•
Confirm the selection with the "LOG / Enter" key.
•
Press the "SET" key repeatedly until you return to measuring mode or wait for 5
seconds; the meter will return to measuring mode automatically.
© PCE Instruments
8