Download Print this page

Epson PowerLite 732c Product Information

Epson powerlite 732c: product information
Hide thumbs


Projector Parts

Focus ring
Exhaust air vent
Foot adjust lever
Lens cap
Video port
Audio port
USB port
Rear adjustable
Power inlet


Type of display
Poly-silicon TFT active matrix
(native format)
24-bit, 16.8 million colors
2000 lumens (High Brightness mode)
1500 lumens (Low Brightness mode)
Contrast ratio
Image size
30 to 300 inches (0.8 to 7.6 meters)
3.2 to 39.7 feet (1.0 to 12.1 meters)
Zoom ring
Control panel
Security lock
I/R receiver
S-Video port
Video port
768 pixels (XGA)
Epson PowerLite 732c Projector
Front, rear, upside-down (ceiling mount)
1 W monaural
sound system
Optical aspect
4:3 (horizontal:vertical)
Zoom ratio
Noise level
36 dB (Low Brightness mode)
Supports USB (type B)
Projection Lamp
UHE (Ultra High Efficiency)
170 W
Lamp life
High Brightness mode: about 2000 hours
Low Brightness mode: about 3000 hours
Part number
Remote Control
20 feet (6 meters)
Batteries (2)
Alkaline AAA
2.7 inches (70 mm), feet retracted
10.9 inches (276 mm)
7.6 inches (193 mm)
3.8 lb (1.7 kg)
Rated frequency
50/60 Hz AC
Power supply
100 to 120 VAC, 2.7 A
200 to 240 VAC, 1.1 A
Operating: 240 W
Operating: 41 to 95 °F (5 to 35 °C)
Storage: 14 to 140 °F (–10 to 60 °C)
Operating: 20 to 80% RH
(non-condensing) Storage: 10 to 90% RH
Epson PowerLite 732c Projector



  Related Manuals for Epson PowerLite 732c

  Summary of Contents for Epson PowerLite 732c

  • Page 1: Projector Parts

    Power consumption Environmental Temperature Humidity (non-condensing) Storage: 10 to 90% RH 2/05 Epson PowerLite 732c Projector Front, rear, upside-down (ceiling mount) 1 W monaural 4:3 (horizontal:vertical) 1:1.2 36 dB (Low Brightness mode) Supports USB (type B) UHE (Ultra High Efficiency)
  • Page 2: Safety And Approvals

    SXGA+60 SXGA+75 SXGA+85 SXGA3—60 SXGA3—75 SXGA3—85 UXGA—60 iMAC VGA iMAC SVGA iMAC XGA MAC13 MAC16 MAC19—60 MAC19 MAC21 *The image is resized using Epson’s SizeWise™ Technology. 2/05 Resolution × 350* × 480* × 480* × 480* × 480* × 600* ×...
  • Page 3: Positioning The Projector

    Follow these steps to plug in and turn on the projector: 1. Remove the lens cap. Caution Do not use the projector with the lens cap in place. The heat generated by the lamp can damage the cap. 2. Connect one end of the power cord to the projector’s power inlet.
  • Page 4: What To Do If You See A Blank Screen

    Source button on Search If you’re using a Macintosh You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select click 2. Select Arrangement If you’re using a Macintosh with OS 8.6 to 9.x:...
  • Page 5: Selecting The Image Source

    After you select a source, the screen goes dark for a moment before the image appears. Note: The PowerLite 732c does not support the Adjusting the Image Once you see your image, you may need to make certain adjustments, as described in this section.
  • Page 6: Adjusting The Image Shape

    Adjusting the Image Shape The projector automatically corrects images that are distorted when the projector is tilted up or down (up to a 15° tilt). The Keystone window appears on the screen while the projector makes the correction. If the projected image still isn’t rectangular or has a “keystone”...
  • Page 7: Sleep Mode

    30 minutes, it automatically turns off the projector lamp and enters “sleep mode.” This conserves electricity, cools the projector, and extends the life of the lamp. If you are done using the projector, unplug the power cord. If you want to start projecting again, press the P button.
  • Page 8: Zooming Your Image

    ❏ Dispose of used batteries according to local regulations. ❏ Remove the batteries if you won’t be using the projector for a long time. Follow these steps to replace the AAA alkaline batteries: 1. Press in the tab to remove the battery cover.
  • Page 9: Using Password Protection

    If you enter the incorrect password 30 times in a row, the projector is locked and remains locked until an authorized Epson servicer can unlock it. You can also create a user’s logo for the projector, to be displayed as the startup screen and/or AV/Mute screen.
  • Page 10: Starting The Projector With A Password

    When you see the Password Protect Release screen, enter the correct password. If you have forgotten the password, contact Epson for assistance and give them the request code number that appears in the Password Protect Release screen.
  • Page 11: Cleaning And Replacing The Air Filter

    If dirt is difficult to remove or the filter is torn, replace it. The air filter set (part number V13H134A08) contains two filters. Contact your dealer or call Epson at (800) 873-7766 to obtain a new set. In Canada, please call (800) 463-7766 to locate a dealer.
  • Page 12: Replacing The Lamp

    Turn the projector off when not in use. Continuous use may reduce the overall life of the product. Contact your dealer or call Epson at (800) 873-7766 in the United States for a replacement lamp. Request part number . In Canada, please call (800) 463-7766 to locate a V13H010L32 dealer.
  • Page 13: Resetting The Lamp Timer

    False ceiling plate Security bracket/cabling for gyro lock mounts Adjustable ceiling channel You can purchase these accessories from an Epson authorized reseller. For product information and to find the nearest authorized reseller, please call 800-GO-EPSON (800-463- 7766) or browse our catalog of products at, select the product you are interested in, and click "Where to...