Zooming Your Image; Using The Remote Control As A Wireless Mouse; Replacing The Batteries - Epson PowerLite 732c Product Information

Epson PowerLite 732c Projector

Zooming Your Image

Follow these steps to zoom in on a portion of the image:
1. Press the button on the remote control. You see
E-Zoom
a crosshair indicating the center of the zoom-in area.
2. Use the pointer button to position the crosshair in the
area you want to enlarge.
3. Continue pressing the
E-Zoom
selected area up to 4 times.
4. While the image is enlarged, you can:
❏ Use the
pointer button to move around the screen.
❏ Press the
E-Zoom
5. When you're done, press the
to its original size.
Using the Remote Control as a Wireless
Mouse
When you use the remote control as a wireless mouse, you can
control your computer or click through slideshow-style
presentations (such as PowerPoint
To control your computer with the remote, make sure you have
connected the USB mouse cable between the projector and your
computer.
Page up or
page down
Left-click or
double-click
Display the
pointer
❏ To advance slides in a PowerPoint presentation in Slide
Show mode, press the
Page Up
remote control. Press the
back a slide.
❏ To display the mouse pointer, press the
❏ To move the pointer on the screen, aim the remote at the
screen and use the pointer button.
❏ To click (or left-click), press the
❏ To right-click, press the
8 Epson PowerLite 732c Projector
-
button to enlarge the
button to zoom out.
button to return the image
Esc
®
) from up to 20 feet away.
Move the pointer
Right-click
or button on the
Enter
or button to go
Page Down Esc
button.
Pointer
button.
Enter
button.
Esc
❏ To double-click, press the
❏ To click and drag, press and hold the
the pointer button to move the pointer, then release the
button.
Enter

Replacing the Batteries

Caution:
When replacing batteries, take the following precautions:
❏
Replace the batteries as soon as they run out. If a battery leaks,
wipe away battery fluid with a soft cloth. If fluid gets on your
hands, wash them immediately.
❏
Do not expose batteries to heat or flame.
❏
Dispose of used batteries according to local regulations.
❏
Remove the batteries if you won't be using the projector for a
long time.
Follow these steps to replace the AAA alkaline batteries:
1. Press in the tab to remove the battery cover.
2. Remove the old batteries, then insert the new ones as shown.
3. Replace the battery cover. (It should snap into place.)
2/05
button twice.
Enter
button and use
Enter