Download Print this page
Texas Instruments TPS92612-Q1 User Manual

Texas Instruments TPS92612-Q1 User Manual

Evaluation module

Advertisement

Quick Links

TPS92612-Q1 Evaluation Module User's Guide
The TPS92612-Q1 evaluation module (EVM) user's guide describes the characteristics and operation of
the TPS92612-Q1 EVM. A complete schematic diagram, printed-circuit board layout, and bill of materials
(BOM) are also included.
...................................................................................................................
1
Introduction
2
TPS92612EVM Description
....................................................................................................................
3
Test Setup
4
Board Layout
5
Schematic and Bill of Materials
1
TPS92612EVM Board
2
TPS92612EVM Layout
3
TPS92612EVM Schematic
1
Jumpers J1, J2, J3, J4, J6
...................................................................................................................
2
Jumpers J5
3
TPS92612EVM Parameters
4
TPS92612EVM Bill of Materials
Trademarks
All trademarks are the property of their respective owners.
1
Introduction
The TPS92612-Q1 EVM helps designers evaluate the operation and performance of the TPS92612-Q1
device, a linear single-channel LED driver for automotive lighting applications. It is a simple and elegant
solution to deliver constant current for a single LED string with full LED protection.
1.1
Features
The EVM has the following features:
Single-channel constant-current LED driver with PWM dimming
LED short-circuit protection with auto-recovery
1.2
Typical Applications
The EVM is used in the following applications:
Automotive convenience lighting: dome light, door handles, reading lamp, and miscellaneous lamps
Automotive rear lamp, center high-mounted stop lamp, side markers, blind-spot detection indicator,
charging inlet indicator
General-purpose LED driver application
SLDU034 – December 2017
Submit Documentation Feedback
ADVANCE INFORMATION
................................................................................................
.................................................................................................................
............................................................................................
.......................................................................................................
......................................................................................................
.................................................................................................
..................................................................................................
................................................................................................
...........................................................................................
Copyright © 2017, Texas Instruments Incorporated
Contents
List of Figures
List of Tables
TPS92612-Q1 Evaluation Module User's Guide
User's Guide
SLDU034 – December 2017
1
2
3
4
5
2
4
5
3
3
3
6
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the TPS92612-Q1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Texas Instruments TPS92612-Q1

  • Page 1 SLDU034 – December 2017 TPS92612-Q1 Evaluation Module User's Guide The TPS92612-Q1 evaluation module (EVM) user's guide describes the characteristics and operation of the TPS92612-Q1 EVM. A complete schematic diagram, printed-circuit board layout, and bill of materials (BOM) are also included. Contents ........................
  • Page 2 • TP2 (GND): Supply ground Test Points All the pins on the TPS92612-Q1 device have test points on the EVM, helping users observe the waveform on the pins, including PWM, SUPPLY, IN, OUT, and GND. TPS92612-Q1 Evaluation Module User's Guide SLDU034 –...
  • Page 3 3. With the default jumper connections, the board should begin operating as soon as the power supply is turned on. Modify the jumpers for other operating modes. SLDU034 – December 2017 TPS92612-Q1 Evaluation Module User's Guide Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
  • Page 4 ADVANCE INFORMATION Board Layout www.ti.com Board Layout Figure 2 illustrates the EVM board layout. Figure 2. TPS92612EVM Layout TPS92612-Q1 Evaluation Module User's Guide SLDU034 – December 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
  • Page 5 0.01uF 0.01µF TPS92612QDBVRQ1 0.01µF SUPPLY 75.0k PWM_X PWM_X VBAT 0.01µF 20.0k SUPPLY Copyright © 2017, Texas Instruments Incorporated Figure 3. TPS92612EVM Schematic SLDU034 – December 2017 TPS92612-Q1 Evaluation Module User's Guide Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
  • Page 6 5002 Keystone Test Point, Miniature, White, TH TP5, TP6, TP7 Testpoint Automotive Single Channel LED Driver, TPS92612QDBVRQ1 Texas Instruments DBV0005A DBV0005A (SOT-23-5) TPS92612-Q1 Evaluation Module User's Guide SLDU034 – December 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
  • Page 7 STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
  • Page 8 FCC Interference Statement for Class B EVM devices NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 9 【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの 措置を取っていただく必要がありますのでご注意ください。 1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用 いただく。 2. 実験局の免許を取得後ご使用いただく。 3. 技術基準適合証明を取得後ご使用いただく。 なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。 上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ ンスツルメンツ株式会社 東京都新宿区西新宿6丁目24番1号 西新宿三井ビル 3.3.3 Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧ください。http:/ /www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 3.4 European Union 3.4.1 For EVMs subject to EU Directive 2014/30/EU (Electromagnetic Compatibility Directive): This is a class A product intended for use in environments other than domestic environments that are connected to a low-voltage power-supply network that supplies buildings used for domestic purposes.
  • Page 10 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2017, Texas Instruments Incorporated...
  • Page 11 IMPORTANT NOTICE FOR TI DESIGN INFORMATION AND RESOURCES Texas Instruments Incorporated (‘TI”) technical, application or other design advice, services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to assist designers who are developing applications that incorporate TI products;...

This manual is also suitable for:

Tps92612evmTps92612