Alarm Output Selection; Run/Stop Output Selection; Motor Number, Motor Coils Current - Fastech Ezi-Step BT-42 Series Operating Manual

7.7 Alarm Output Selection

Alarm signal output method can be selected when error happens. Select a desired method
by pressing in
Press button to save the value selected into the drive.
※ The default factory setting is Nomal.

7.8 Run/Stop Output Selection

Run/Stop output method can be selected that indicate the motor running status. Select a
desired method by pressing
screen.
Press button to save the value selected into the drive.
※ The default factory setting is Nomal.

7.9 Motor Number, Motor Coils Current

This parameter can not be changeable. The information of Motor Number is needed for A/S
of drive.
button on Ezi-STEP BT Setting screen.
in button on Ezi-STEP BT Setting
19 - www.fastech.co.kr