System Configuration - Fastech Ezi-Step BT-42 Series Operating Manual

FASTECH Co.,Ltd.

8. System Configuration

※Standard cable length of Power and Signal is 30cm. Extension cable is needed to extend this limitation.
8.1 Option
①Power Cable
Available to connect between Power and
Ezi-STEP BT.
Item Length[m]
CBTS-P-□ □ □F
CBTS-P-□ □ □M
CBTL-P-□ □ □F
CBTL-P-□ □ □M
□ is for Cable Length. The unit is 1m and Max. 2m length.
②Signal Cable
Available to connect between Control Unit and
Ezi-STEP BT.
Item Length[m]
CBTS-S-□ □ □F
CBTS-S-□ □ □M
□ is for Cable Length. The unit is 1m and Max. 20m length.
www.fastech.co.kr - 20
Remark
□ □ □ Normal Cable
□ □ □ Robot Cable
□ □ □
Normal Cable for BT-86
Robot Cable for BT-86
□ □ □
Remark
□ □ □ Normal Cable
□ □ □ Robot Cable
③Communication Cable
Available to connect between PC and Ezi-STEP BT.
This is used for change setting value of Resolution
and STOP Current etc.
Item Length[m]
CBTS-C-□ □ □F □ □ □
□ is for Cable Length. The unit is 1m and Max. 15m length.
Remark
Normal Cable