FASTECH Co.,Ltd.
5. Installation and Cabling
5.1 Notes on Installation
1) Ezi-STEP BT is designed for indoor use only.
2) The ambient temperature of the room should be 0 ℃ ~50 ℃ .
3) If the temperature of the product case is higher than 50 ℃ , radiate heat of the
outside to cool down.
4) Do not install Ezi-STEP BT under direct rays, near magnetic or radioactive
objects.
5.2 Connection Diagram
*Alarm Rest signal line is also
used for Motor FREE signal.
(For details, please refer to
the section for Control Input/
Output signal)
www.fastech.co.kr - 12