7.2.5 Polarity Run Signal
Run/Stop output method can be selected that indicate the motor running status.Select a desired
method by pressing
Press
* The default factory setting is Normal.
7.2.6 Polarity Alarm Signal
Alarm signal output method can be selected when error happens. Select a desired method by
pressing
in
Press
* The default factory setting is Normal.
7.2.7 Polarity Alarm Reset Signal
Input Methol of Motor Free / Alarm reset can be selected. Select a desired method by pressing
in
Press
* The default factory setting is Normal.
[CAUTION] : When you selet 'lnverse' : It can be 'Motor Free' status when powen is provided to
EzStep during Signal Connector(CN2)is not connected. The power led(green)is
blinking to show the status of 'Motor Free'.
in
button to store the value selected into the driver.
icon on EzStep Setup screen.
button to store the value selected into the driver.
icon on EzStep Setup screen.
button to store the value selected into the driver.
icon on EzStep Setup screen.
17