Adjust The Image; If You See A Blank Screen - Epson PowerLite 51c Quick Setup

Adjust the image

Remove the lens cap and rotate the focus ring
1
to sharpen the image.

If you see a blank screen

Note:
below. Otherwise, continue with Step 2 in the next column.
If you see a blank screen or the No Signal message
after turning on your laptop, check the following:
Make sure the power light is green and
not flashing and the lens cap is off.
Try turning off the laptop and restarting it.
If you've connected more than one computer and/or video source,
you may need to press the Source button on top of the projector.
(Allow a few seconds for the projector to sync up after pressing it.)
If these suggestions don't work, try the procedure for your system
in the following sections. For more troubleshooting information,
see your User's Guide.
For a Windows laptop:
Press the function key that lets you display on an external monitor.
It may have an icon such as
You may have to hold down the Fn (function) key while pressing it.
(Allow a few seconds for the projector to sync up after pressing
the key.) Check your laptop's manual or online help for details.
On most systems, the
the LCD screen and the projector, or display on both at the
same time.
You might need to use the Display utility in the Control Panel
to enable both the LCD screen and external monitor port.
EPSON PowerLite 51c/71c
EPSON is a registered trademark of SEIKO EPSON CORPORATION. PowerLite is a registered trademark of Epson America, Inc.
Copyright © 2001 by Epson America, Inc. 12/01
focus ring
after focusing, see the box
No signal
If You See a Blank Screen
No signal
, or it may be labelled CRT/LCD.
or CRT/LCD key let you toggle between
EPSON PowerLite 51c/71c
2 Raise the image as needed. To do this, pull up the blue foot
release levers and lift the front of the projector. Once the
image is positioned where you want it, release the levers
to lock the feet in position.
3 If your image looks like
at an angle to the screen. Move it directly in front of the
center of the screen, facing the screen squarely.
If your image looks like
4
the Keystone button to correct the shape of the image.
®
For a PowerBook with OS 9.x or earlier:
1. From the Apple menu, select Control Panels, then click
Monitors and Sound.
2. Click the Arrange icon.
drag one monitor icon
on top of the other
3. Drag one monitor icon on top of the other. This lets you display
on the projector screen as well as the LCD screen.
For a PowerBook with OS X:
1. From the Apple menu, select System Preferences, then click Displays.
2. Click Detect Displays to display part of your desktop on the
projector screen.
3. To display the entire desktop on both your projector screen
and LCD screen, click the Arrange tab. (If you don't see this tab,
check to see if there is a
window hidden by another
window on your screen.)
4. Click Mirror Displays. One of
the monitor icons automatically
moves on top of the other.
click here
or , you've placed the projector
or , press the + or – side of
click here
CPD-13441