Download Print this page

Yale Narrow Profile Series Installation Instructions

Advertisement

Quick Links

Narrow Profile Series
250 Series
Sized Closers
251(BF) Series
Multi-Sized Closers
"BC" suffix (Backcheck) is an optional feature for sized closers but is standard with Multi-Sized closers.
A separate instruction
Regular Arm
Installation
Closer on door
on hinge (pull)
side of door
See Page 2
Top Jamb
Installation
Closer on frame
on opposite to hinge
(push) side of door
See Page 3
Parallel Arm
Installation
Closer on door
on opposite to hinge
(push) side of door
See Page 4
NOTE:
For special applications a separate door and frame preparation template is packed with these instructions
Use this instruction sheet for installation sequence and closer adjustments only
• It is recommended that the door on which the door closer will be installed be hung on ball bearing hinges. Door must swing freely
• A separate door stop, supplied by others, is recommended to prevent damage to the door closer, closer arm, or to the door, frame or
adjacent walls.
• Door and Frame must be properly reinforced, or use of special fasteners employed, to prevent the mounting screw from pulling out.
• All dimensions are given in inches with corresponding metric dimensions (mm) in parenthesis.
Components:
Spring Power Adjustment Screw
(1/8 Hex Drive)
"BC" Valve
4
Closer
Size
Stamp
Pinion Cap
Installation Instructions
80-9350-2527-010 (06-09)
An incorrectly installed or improperly
adjusted door closer can cause
property damage or personal injury.
These instructions should be followed
to avoid the possibility of
misapplication or misadjustment.
See Page 3 for an explanation of the Backcheck feature.
"DL" suffix (Delayed Action) is an optional feature.
showing valve locations and adjustment procedures
Left Hand Door - LH
Right Hand Reverse - RHR
Right Hand Door - RH
Left Hand Reverse - LHR
Right Hand Door - RH
Left Hand Reverse - LHR
NON HOLD OPEN
Closer Body
"L"Valve
will be packed with these instructions.
289 Soffit Plate
Used with Parallel
Arm Closers Only
"S"Valve
Non Hold Open Models
Sized
(Sizes 4,5,& 6)
254(BC)
255(BC)
256(BC)
Right Hand Reverse - RHR
Right Hand Reverse - RHR
Arm Assembly
Main Arm Screw
Main Arm
Arm Slide
Connecting Rod
Multi-Sized
(Sizes 3 thru 6)
251
(Sizes 1 thru 4)
251BF
Right Hand Door - RH
Left Hand Reverse - LHR
Left Hand Door - LH
Left Hand Door - LH
Regular
Arm/Top
Jamb Shoe
Forearm
Screw
Page 1

Advertisement

loading

Summary of Contents for Yale Narrow Profile Series

  • Page 1 Installation Instructions Non Hold Open Models 80-9350-2527-010 (06-09) Sized Multi-Sized Narrow Profile Series (Sizes 3 thru 6) (Sizes 4,5,& 6) An incorrectly installed or improperly adjusted door closer can cause 250 Series Sized Closers property damage or personal injury. 254(BC)
  • Page 2 Regular Arm Installation Template Side Elevation 1-3/4 (152) (44.5) 1-1/4 (32) Dimension A Opening inches To 100° (12.7) 101° to 120° 121° to 180° 3-1/2 9-1/16 (19.1) * Door/Wall/Hardware/Jamb (230.2) conditions permitting • Do not scale drawing. Hinge or Pivot •...
  • Page 3 Top Jamb Installation Using 587 Dropplate Template Side Elevation (178) 1-1/2 (13) (101.6) (38.1) Dimension A Opening (22) inches 1-3/4 To 100° 8-1/2 (44.5) 1-3/4 101° to 120° 177.8 (127) (44.5) 121° to 180° 4-1/2 • Do not scale drawing. * Door/Wall/Hardware/Jamb •...
  • Page 4 Tel: (800)-438-1951 • Fax: (800)-338-0965 Copyright © 2001, 2009, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved. www.yalecommercial.com Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited. Page 4...

This manual is also suitable for:

250 series251 bf series254 bc255 bc256 bc