Table of Contents
Advertisement
LAN LED Connector
The LAN LED connector is used to detect the connection state of RJ45 LAN ports when the
connection is made to an active network via a cable. The pin functions of the LAN LED con-
nector are listed below.
Pins
Pin Assignment
Link Activity
1
GLED_LED_1000-
3
Link Activity
5
GLED_LED_1000-
7
Chapter 2 Hardware Installation
Chapter 2
8
7
1
2
LAN 2 State
LAN 2 State
LAN 1 State
LAN 1 State
Pins
Pin Assignment
+3V_standby
2
GLED_LED_100-
4
+3V_standby
6
GLED_LED_100-
8
Battery
The lithium ion battery powers the real-time clock and CMOS memory. It is an auxiliary source
of power when the main power is shut off.
Safety Measures
• Danger of explosion if battery incorrectly replaced.
• Replace only with the same or equivalent type recommend by the manufacturer.
• Dispose of used batteries according to local ordinance
31
Battery
.
www.dfi .com
Advertisement
Table of Contents
