Clearance Between Feed Dog And The Needle Plate - Side Ways - Husqvarna VIKING E10 Service Manual

Clearance between feed dog and the needle plate – Side ways
Check
1. Set pattern selector dial to "A". Turn stitch length dial to "4".
2. Turn hand wheel to move feed-dog forward and backward.
3. The feed dogs shall not at any point touch the needle plate in the left side or the right side.
Adjustment
1. Remove the face plate, free arm cover, base plate and back cover.
2. Loosen screw (a, b). Move feed dog left / right to middle position.
3. Tighten screws (a, b) after adjustment.
4. Attach covers.
24 104 72 72-26