Solutions To Problems - TEXA TXB EVOLUTION Manual

11 SOLUTIONS TO PROBLEMS

For any technical problem contact your retailer/distributor.
Below you will find a list of simple instructions that the client can carry out without
having to ask for technical assistance.
PROBLEM
The tool won't
communicate with
the control unit.
The tool cannot
communicate with
the display unit/
Bluetooth
peripherals.
PROBABLE CAUSE
The diagnostic cable is not connected
properly.
The adapter being used is not suitable.
The diagnostic cable is damaged.
The vehicle is off.
The Bluetooth peripheral/display unit
is turned off.
The Bluetooth peripheral/display unit
is not within the tool's range.
<UNTRASLATED>
The tool has not been properly
configured.
POSSIBLE
SOLUTION
Connect the
diagnostic cable
properly.
Use a suitable
adapter.
Change the
diagnostic cable.
Turn on the
vehicle.
Turn on the
Bluetooth
peripheral/display
unit.
Move the
Bluetooth
peripheral/display
unit into the tool's
range.
Move the tool into
the range of the
Bluetooth
peripheral/display
unit.
Perform the
configuration
through the
special function in
the software.
33
en