Connection Via Bluetooth (Recommended) - TEXA TXB EVOLUTION Manual

10.2.1 Connection via Bluetooth (Recommended)

The wireless connection eliminates the communication cable with the display
unit, making the device more practical to use.
The external antenna for the Bluetooth communication is on the front part of the
tool.
The serial number to use to configure the Bluetooth communication can be
found on the plate located on the bottom part of the tool.
The blue LED flashes:
during the configuration phase of the Bluetooth communication
•
• during the communication between the tool and the display unit, while the data is
being exchanged
For a correct configuration, we recommend powering the tool
(making sure the green LED is on) BEFORE launching the software
configuration procedure.
For further information regarding the configuration procedure consult the
software's Operating Manual.
28