Tool Safety - TEXA TXB EVOLUTION Manual

Safety Measures:
Do not allow unqualified personnel using the tool, in order to avoid accidents to
•
people or damages to the tool or to electronic systems of the vehicle to which it
is connected.
• Follow the instructions provided by the software closely and carefully.

4.4 Tool Safety

The tool was designed for the use in specific environmental conditions.
The use of the tool in environments with temperature and moisture
characteristics different from those specified may impair its efficiency.
Safety Measures:
Place the tool in a dry place.
•
• Do not expose or use the tool near heat sources.
Position the tool making sure it can be properly ventilated.
•
Do not use corrosive chemicals, solvents or harsh detergents to clean the tool.
•
The tool was designed so as to be mechanically tough and suitable for
use in a workshop.
Carelessness in the use and excessive mechanical stresses may
impair its efficiency.
Safety Measures:
Do not drop, shake or subject the tool to shocks.
•
• Do not place the tool where it could fall into water. Avoid any contact with water.
• Do not place objects over the cables and do not bend them.
Do not perform any kind of intervention that may damage the tool.
•
• Do not open or dismantle the tool.
• Do not bend the antenna of the tool.
Use the tool only with the provided antenna or with another one authorized by the
•
manufacturer of the tool.
en
15