3.2.6 Fire and Explosion Hazard
The following are potential fires and/or explosion hazards:
•
The types of fuel used by the vehicle and the vapours released by these
fuels.
The refrigerants used by the A/C system.
•
•
The acid in the vehicle batteries.
Safety Precautions:
Let the engine cool.
•
Do NOT smoke near the vehicle.
•
•
Do NOT expose the vehicle to open flames.
Make sure that the electrical connections are all well insulated.
•
Collect any fuel that might have spilled.
•
•
Collect any refrigerant that might have spilled.
•
Make sure you are always working in an environment equipped with a good
ventilation and air extraction system.
Always activate the air extraction system when working in closed environments.
•
•
Cover the openings of the batteries with a wet cloth in order to stifle the explosive
gases before proceeding in testing or recharging.
Avoid causing sparks when connecting cables to the battery.
•
3.2.7 Noise Hazard
Loud noises that may occur within the workplace, especially during
service operations may damage the operator's hearing.
Safety Precautions:
Protect your ears with suitable protective ear wear.
•
3.2.8 High Voltage Hazard
The voltage supply from the mains that powers the devices in the
workplace and the voltage within the vehicle starter system is a
potential shock hazard to the operator.
Safety Precautions:
Make sure the electrical system in the workplace is compliant to current national
•
standards.
•
Make sure the device being used is connected to ground.
•
Cut off the power supply voltage before connecting or disconnecting cables.
Do NOT touch the high voltage cables when the engine is on.
•
•
Operate in conditions of insulation from ground.
en
11