TEXA TXB EVOLUTION Manual page 16

The tool was designed so as to be electrically safe and to work with
specific power supply voltage levels.
Failure to comply with the specifications related to the power supply
may impair the tool efficiency.
Safety Measures:
• Do not wet with water or other liquids.
• If not otherwise specified, use the tool on vehicles with a 12/24V DC power supply
and the chassis connected to the negative pole.
The connection for the power supply of the tool should always occur with the
•
battery system of the concerned vehicle.
Do not use external batteries to supply the tool unless it is explicitly required by
•
the software.
• Pay particular attention to battery terminals and cables when setting up a
connection to the vehicle. This will avoid false contacts and/or avoid accidentally
connecting the cables to metallic parts of the vehicle being tested.
Unused terminals must be covered and protected by the appropriate rubber plugs.
•
Electromagnetic compatibility tests on the tool ensure that it can be
adapted to technologies normally used on vehicles (e.g.: engine check,
ABS, airbag etc.). Nevertheless, if malfunctions occur you need to
contact the retailer.
16