Hearth & Home IFT-RC400 User Manual

IFT-RC400 IntelliFire Touch Remote Control
Introduction
This user manual serves as a quick reference to the
screen, functions and indicators on your IntelliFire Touch
Remote control.
SCREEN SCREEN
INDICATOR BAR
ROOM TEMPERATURE
FUNCTIONS FUNCTIONS
Turn Flame On/Off
Toggle this function to turn ON or OFF your appliance.
IFT-RC400
Model: 2564-110
User Manual
DISPLAY
SELECTION
INDEX
4
3
2
1
OFF
Hearth & Home Technologies • IFT-RC400U User Manual • 2564-983 • 10/20
Thermostat
You can set and maintain your desired room temperature
with the thermostat function. This function automatically
adjusts your appliance to maintain the desired set
temperature (ST).
To achieve the most accurate thermostat function, place
your remote control in the same general space that
you want to have the temperature controlled by your
appliance. For best
control away from direct radiant heat from the appliance,
adjacent windows and doors, HVAC vents, and direct
sunlight.
To use the thermostat function, access the main menu
screen on your remote, and select thermostat. Next,
select your desired set temperature and press SET to
confirm the setting. The actual room temperature (RT),
measured by your remote control, will be displayed in
the upper right corner of the main menu screen. To turn
the thermostat function off, select thermostat on the main
menu screen and select OFF in the bottom left corner of
the temperature setting screen.
The thermostat function will automatically adjust the flame
height based on the difference between the RT and the
ST. As the RT rises closer to the ST, the flame height will
automatically adjust down.
During thermostat use, you will not be able to set your
desired flame height level. Your appliance will
automatically adjust flame height based on the difference
between the RT and ST.
results, keep your remote
1