Download Print this page

Hearth & Home IntelliFire Touch IFT-RC400 User Manual

Hide thumbs Also See for IntelliFire Touch IFT-RC400:

Advertisement

Quick Links

Introduction
This user guide serves as a quick reference to the screen,
functions and indicators on your IntelliFire Touch Remote
control.
SCREEN
SCREEN
INDICATOR BAR
ROOM TEMPERATURE
Fan Speed
FUNCTIONS
DYNAMIC ICONS
IFT-RC400
IntelliFire Touch
DISPLAY
SELECTION
INDEX
4
3
2
1
OFF
Hearth & Home Technologies • IFT-RC400 User Guide • 2326-983 Rev. J • 2/20
Remote Control
®
User Guide
Turn Flame On/Off
Toggle this function to turn ON or OFF your appliance.
Thermostat
You can set and maintain your desired room temperature
with the thermostat function. This function automatically
adjusts your appliance to maintain the desired set
temperature (ST).
To achieve the most accurate thermostat function, place
your remote control in the same general space that
you want to have the temperature controlled by your
appliance.
For
control away from direct radiant heat from the appliance,
adjacent windows and doors, HVAC vents, and direct
sunlight.
To use the thermostat function, access the main menu
screen on your remote, and select thermostat. Next,
simply select your desired set temperature by using the
arrow keys and press ON to confirm the setting. The
actual room temperature (RT), measured by your remote
control, will be displayed in the upper right corner of the
main menu screen. To turn the thermostat function off,
simply select thermostat on the main menu screen and
select OFF.
If the RT cools to more than 2 °F lower than the ST for
at least 2 minutes, then your appliance will automatically
turn ON. The thermostat function will automatically adjust
the flame height based on the difference between the RT
and the ST. As the RT rises closer to the ST, the flame
height will automatically adjust down. If the RT rises 2 °F
above the ST for at least 2 minutes, then your appliance
will automatically turn OFF.
During thermostat use, you will not be able to set your
desired flame height level. Your appliance will
automatically adjust flame height based on the difference
between the RT and ST.
Flame Height
You can set your desired flame height level to affect the
ambiance and control the heat output.
Your appliance will remember the previous flame height
setting and adjust the flame to that level 10 seconds after
start.
FUNCTIONS
FUNCTIONS
best
results,
keep
your
remote
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the IntelliFire Touch IFT-RC400 and is the answer not in the manual?

Questions and answers

Summary of Contents for Hearth & Home IntelliFire Touch IFT-RC400

  • Page 1 IFT-RC400 IntelliFire Touch Remote Control ® User Guide Introduction FUNCTIONS FUNCTIONS This user guide serves as a quick reference to the screen, functions and indicators on your IntelliFire Touch Remote control. Turn Flame On/Off Toggle this function to turn ON or OFF your appliance. SCREEN SCREEN Thermostat...
  • Page 2 INDICATORS INDICATORS FUNCTIONS FUNCTIONS Timer Temperature Display For your convenience a timer can be set up to 180 min- You can toggle the temperature display between °F and utes to turn off your appliance. The timer will turn the °C by tapping on the Room Temperature area. flame off automatically at the selected preset time.
  • Page 3 INDICATORS INDICATORS Replace Remote Batteries Must Replace Remote Batteries to Operate Pairing Appliance The green icon indicates that the remote is paired to your appliance and can operate it. If the icon is gray, it is not paired. Please contact your dealer and report this issue. Call Dealer - Pilot Flame Error Your appliance has been disabled.
  • Page 4: Maintenance

    Maintenance Your appliance will remind you to schedule routine ser- vice after 300 hours of Flame ON time is accumulated. Please contact your dealer for a 300 hour inspection to ensure your appliance is operating at peak performance. To reset the 300-hour maintenance reminder if the RC400 displays the following message: 1.
  • Page 5: Frequently Asked Questions/Troubleshooting

    Frequently Asked Questions/Troubleshooting Symptom Possible Cause Corrective Action The appliance does not Batteries are depleted. Install NEW batteries. respond to commands from the remote control display does Batteries are incorrectly Verify batteries are installed in correct orientation as not light up when screen is oriented.
  • Page 6 Frequently Asked Questions/Troubleshooting Symptom Possible Cause Corrective Action Verify home circuit breaker is on and master reset is on The remote is displaying the No power to appliance (if equipped) following message on screen: ‘Remote Control Check power to appliance or if ECM battery backup is Power outage Communication Error’...