Installing The System Memory - Lanner FW-7526 User Manual

3. Slide the compartment as the arrows of directions below to access the inside of the system.

Installing the System Memory

The motherboard supports DDR3 1333MHz (non-ECC) SO-DIMM Single channel up to 16GB.
Please follow the steps below to install the DIMM memory modules.
1. Power off the system and locate the DDR DIMM slot.
2. Align the DIMM module and make sure the notches of the module aligned with the socket
keys in the slot.
3. Insert the module into the slot in a diagonal angle and press it down until it's firmly seated by
the clips at both sides.