Dynamic Frequency Selection Considerations - Cisco FM4200 Installation And Configuration Manual

Ultra-reliable wireless backhaul fiber
Hide thumbs Also See for FM4200:
Table of Contents

Advertisement

Table 4. Available Radio Channel Widths
Channel width
5 MHz
10 MHz
20 MHz
40 MHz

Dynamic frequency selection considerations

To ensure that commercial and military flight operations proceed without
interference to terminal doppler weather radar (TDWR), operation of the
unit in the 5.250 GHz-to-5.350 GHz band (known as U-NII Mid or U-
NII-2A) and the 5.470 GHz-to-5.725 GHz band (known as U-NII
Worldwide or U-NII-2C / U-NII-2E) is discouraged.
Operation of the unit within these frequency ranges is disabled by default.
WARNING
If the unit is operated in the U-NII Mid or U-NII Worldwide
frequency ranges, dynamic frequency selection (DFS) may be
a legal requirement in your national territory.
For information on whether legislation requires that you use
DFS,
IMPORTANT
The dynamic frequency selection feature must be enabled
using a software plug-in ( Cisco part number FM-UNII2).
Contact your Cisco Networks representative for details.
If it is essential that the unit is operated in the U-NII Mid or U-NII
Worldwide frequency ranges, do the following steps:
1.
Make sure that local legislation permits operation of the unit in the
U-NII Mid and/or U-NII Worldwide frequency ranges. Use of these
frequency ranges may be prohibited in some territories.
2.
Make a note of the exact physical locations of the unit antennas.
3.
Consult your local Cisco Networks representative. He or shewill
be able to determine whether the unit can be safely used inits
current location.
4.
If the unit can be safely operated in the U-NII Mid or U-NII
Worldwide
Cisco Networks representative will forward you the
Cisco UNII2 plug-in (part number FM-UNII2) free of charge.This
plug-in unlocks access to these frequency bands.
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
Max.modulation speed
37 Mb/s
75 Mb/s
150 Mb/s
300 Mb/s
click here.
frequency
ranges in its
Max. throughput
8 Mb/s
16 Mb/s
90 Mb/s
150 Mb/s
current location,
your
Page 78 of 189

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fm4500 fiberFm1000Fm1200 voloFm3200 baseFm3500 endoFm4200 fiber ... Show all

Table of Contents