Adjusting Projected Images; Power Off - Epson EMP-8300 Quick Reference Manual

Adjusting projected
images
Turning the Projector off
Turn the power off
for the equipment
that is connected to
the projector.
Press the button
twice to turn the

power off.

Set the [R/C] switch
to "OFF".
Moving projected images vertically
(Lens shift)
Up
Down
Making fine adjustments to the projection
area size (Zoom)
Increase
Decrease
Adjusting the focus of images (Focus)
Flashes orange* (Cool-down in progress/approx. 30 seconds)
→ Lights orange
* Do not disconnect the power cable while the indicator is still flashing
orange, otherwise it may result in errors in projector operation.
If not using for a long period, disconnect the power cable from the electrical outlet.
Changing the colour mode
The colour mode changes as follows each time
this button is pressed
Presentation
Dynamic
Retrieving preset settings
(Adjustment is only possible when analogue RGB
signals are being input)
The "Video" menu settings (such as input
resolution and tracking) for the respective
preset number are retrieved each time this
button is pressed.
(Operation) indicator
If the message "The projector is overheated. Clean or replace the
air filter and lower the room temperature." appears during
projection of images, press the
and then clean or replace the air filters.
User's Guide "Cleaning the Air Filters and Air Intake Vent"
"Replacing the Air Filters"
Theatre
sRGB Living Room
User's Guide "Selecting the Projection
Quality (Colour Mode Selection)"
User's Guide "Preset Function"
User's Guide "Turning the Projector Off"
button to turn the power off