Wallplate Installation - Robertshaw RS9110 Installation Manual

WALLPLATE INSTALLATION

Caution:
Electrical Hazard
Disconnect power before
installing this product. Failure
to do so can cause electric
shock or equipment damage.
For a vertical mount,
put screws on the
top and bottom.
For a horizontal mount,
put screws on the left
and the right.
Horizontal mount
4
Mercury Notice:
This product is mercury-free. However,
if this product is replacing a control
which contains mercury, it needs to
be disposed of properly. Contact your
local waste management authority for
instructions regarding recycling and
proper disposal of the control.
Vertical mount
Vertical mount
Horizontal mount